MGR1000 PRO 4 x 4 Jump Starter
Details :
A Real Life Saver: Ultra Strong Jump Starting Power
20,000mAh capacity battery pack is able to jump start all 12V gasoline/petrol cars and up to 4.5 L diesel engine up to 30times with 1000A peak current. This unit has been tested on vehicles including V8 diesel engines and will provide multiple starts even without a battery connected.
Extremely powerful and has proven very popular for 4×4’s farming, caravan parks, councils and multiple industries that need a reliable and powerful jump starter for their small to mid sized diesel engines.
True Capacity 20000mAh & True 1000A Peak Current: 4PCS * 5000mAh High-Rate Lithium Polymer Battery to make true 20000mAh capacity. What we use are High-Temperature Batteries to be much safer when storage in cars. Innovative and field-leading technology to use 4PCS batteries to make the jump starter, not 3PCS batteries in the market, to get a higher jump starting power of 1000A.
USB Outlets: Bi Directional USB-Type-C 60 watt & USB-A 5V 2.1A Bi Directional Type-C fast charging port means it will accept and discharge up to 60 watts per hour. This port is used for charging the MGR1000 Pro. It is also able to fast charge smart cell phones, mobiles, tablets, pads, and other consuming electronic devices. 20000mAh capacity can charge your smart phones about 6 times or charge your tablets about 2 times.
Dual High-Current DC12V Outlets: DC12V15A with Cigarette Lighter Adapter Able to drive almost all car electronic appliances: such as car DVR, car cooler, car vacuum cleaner, car air compressor, car power tool, car walkie talkie, car lift jack, car fan, car light, sat nav’s, camera batteries and other deviceS.
Ultra-Bright LED Light: 1 Watt
With 3 modes of emergency lighting, SOS, strobe
Ultra Compact-Size & Light-Weight: Only 178mm x 84mm x 50mm and only 630g, which is so portable and handy, small enough to be easily stored in your glovebox or in your bag.
Advanced Satety Protection: Smart Booster Cable with LED indicator light – The MGR1000 has the latest in smart cable technology. The smart cables have multiple protections including Short-Circuit Protection – Reverse-Charging Protection – Reverse-Polarity protection – Over-Current Protection – Over-Load Protection – Over-Voltage Protection – Over-Charge Protection – Over-Discharge Protection – Over-Temperature Protection As an additional protection, the Smart booster cables will automatically alarm if connected incorrectly ensuring safety at all times for both the jump starter and your vehicle.
Steps Easily to Jump Start Your Car: – Insert the smart booster cable to the jump starter port: the LED indicator light will flash red and green – Connect the positive/red clamp to the “+” car battery terminal and negative/black clamp to the “-” car battery pole. The LED lights will continue to flash Red and Green. Start your vehicle.5
Car Jump Starter Specifications: – Battery Capacity: 20000mAh = 74Wh – Peak Current: 1000A – Input: 15V/1A – Fully Charged Time: about 1.5 to 5 hours – Type-C 60W Bi Directional USB outlet: USB-A 5V2.1A – Dual DC Output: 12~16V15A – LED Light: 1W of Light/SOS/Strobe – Operating temperature: -20 to +60 ℃ – Size: 178x84x50MM
– Weight: 630G
What’s in the Box:
1x MGR1000 4 x 4 jump starter
1x Smart intelligent auto activate booster cables. Relay style
1x Type-C to Type-C cable. Use this for charging the MGR1000 Pro from an Type-C USB port. Also use if for charging Type-C compatible devices.
1x USB-A to Type-C cable. Use this for charging the MGR1000 Pro from a USB-A port.
1 12 volt adapter to allow you to run 12 volt appliances from the jump starter.
OBDII memory saver. Plug into the OBD (On Board Diagnostic) port under the dash and your jump starter when you need to disconnect the battery. It saves the car computers memory. No more resetting of everything after a battery change.
1x Sturdy Zipper carry case (soft hard) to keep everything together.
1x MGR1000 users manual.
Attentions:
– Use this unit for 12V automotive vehicle batteries only, and with 1000CCA rating or less.
– This unit is for emergency jump starts only: Do not use it as a replacement for the car battery.
– Make sure the jump starter capacity is >50%, that is at least 2 solid indicator lights are on.
– Do not connect together or reverse connect of the positive/red and negative/black clamps.
– Disconnect the cable from the jump starter and from the car battery immediately after the engine is started.
– Please only use the provided smart booster cable only for our this jump starter unit.
– Please full charge it at least one time every 3 months- Do not expose this unit to rain or fire.
– Keep away from children.
Reviews
There are no reviews yet.